We produce custom metal stamping parts at high speed with consistent quality. Our factory runs 40+ mechanical presses from 60T to 400T. We make custom stamped parts for automotive, electronics, agriculture, and more. Every project starts from your drawings, not from a catalog.
What Is Metal Stamping?
Metal stamping shapes flat sheet metal into finished parts. A press forces a die into the sheet. The process is fast, repeatable, and cost-effective at volume.
- Stamping is ideal for high-volume production
- Parts keep consistent dimensions across every batch
- Tooling investment is shared across thousands of parts
Metal Stamping Services We Offer
- Progressive die stamping — multiple operations in one continuous run
- Blanking & piercing — clean-cut profiles and hole patterns
- Forming & bending — shaped features without weakening the material
- Coining & embossing — detailed surface features and markings
- Deep drawing — seamless cups and housings (see our deep drawn parts)
- Secondary operations — deburring, tapping, welding, and finishing
Our Metal Stamping Capabilities & Equipment
See the full list of factory equipment on our sheet metal fabrication services page. 🔧Click here .→
Materials for Metal Stamping
- Stainless steel — 304, 316, and other grades
- Aluminum — formable alloys for lightweight parts
- Carbon steel — strong and cost-effective
- Brass and copper — conductive and corrosion-resistant
- Thickness ranges from thin-gauge to heavy-gauge sheet, per your drawing
Metal Stamping Tolerances
Tolerances follow your drawing requirements. We verify critical dimensions with gauges and inspection fixtures. Our engineers confirm achievable tolerances before we start tooling.
- Dimensional checks at first article and during production
- Inspection reports provided on request
- Tolerance confirmation before mass production begins
Common Custom Stamped Parts
Stamped parts cover a wide range of industries and applications. Below are the part types we produce most often.
- Mounting brackets & plates — structural fixing for machinery, vehicles and equipment
- Enclosures & chassis — protective housings for electronics and controls
- Clips, clamps & fasteners — quick assembly and secure fixing in metal hardware
- Motor laminations & cores — blanked stacks for electric motors
- Housings & covers — formed enclosures for electronics and appliances
- Guards & shields — safety covers for machinery and power tools
- Firefighting components — brackets, fittings and valve parts
- Agricultural equipment parts — guards, brackets and wear components
- Connectors & terminals — conductive parts for electrical systems
From Prototype to Production
Every stamping project follows a clear path. Our engineers review your drawing first. We design tooling for your part geometry. We produce and approve sample parts before mass production.
- Drawing review and process proposal
- Tooling design and build
- Sample stamping and first-article inspection
- Production runs with in-process checks
- Final inspection and shipment
Real Project Result
A representative project from our production history—over 70,000 different types of custom metal parts delivered to date:
Stamped mounting bracket for industrial equipment
An industrial equipment maker needed a one-piece bracket with multiple bends and mounting features. The part required symmetric angles, cutouts, and countersunk holes. Progressive die stamping produced it in one continuous run.
- Part: metal mounting bracket, stamped from a single sheet
- Process: progressive die stamping — blanking, piercing, bending, and countersinking in one tool
- Key challenge: holding symmetric angles and flatness across the whole bracket
- Our solution: die design with controlled material flow, plus first-article verification
- Production: 50,000 pcs per order after sample approval
- Quality result: 100% first-article inspection; mounting hole dimensions checked
Why Choose Us for Custom Metal Stamping Parts?
- 40+ presses from 60T to 400T for flexible capacity
- In-house tooling for faster project startup
- Multi-process support: stamping, deep drawing, laser, bending, welding
- 19 engineers review your drawings before tooling
- ISO 9001:2015 certified quality management
- Export experience to Europe and North America
Frequently Asked Questions
What is the minimum order quantity for custom metal stamping parts?
There is no fixed MOQ. Tooling cost depends on part design. Prototyping starts from a single piece.
Who owns the stamping dies?
Tooling ownership is agreed in the project contract. We store and maintain dies for repeat orders.
Can you provide samples before mass production?
Yes. We produce sample parts for your approval before production starts.
Which materials can be stamped?
Stainless steel, aluminum, carbon steel, brass, and copper. Thickness follows your drawing and process needs.
Act Immediately! Please Hand Over Your Project To Us!
Ready to start your stamping project? Get a quote for your custom metal stamping parts today.
Send your drawings in any format; our engineers will review manufacturability at no cost. You will receive a clear proposal with process, pricing, and lead time within one business day.