Weizhi metal fabrication
Menu
  • Home
  • About Us
    • factory display
    • Equipment List
    • Stainless Steel Fabrication
    • Metal Fabrication FAQ
    • Delivery, Shipping & Incoterms
  • Services
    • Sheet Metal Fabrication
      • Stamping / Deep Stamping
      • Laser Cutting
      • Bending
      • Welding
    • CNC Machining
    • Metal Casting
    • Design Optimization
    • Surface Treatment
  • Quality Control
  • Project Case
    • Metal Frames
    • Metal Box Body Shell
    • Metal Bracket
    • Metal Clips
    • Metal Trays
    • Hardware Tools
  • Blog
Contact

Blog

A cold piece of metal, how many times does it need to undergo "thousands of hammerings and tempering" before it can become your core component? The answer lies in our insistence on every micrometer of tolerance. What you care about - delivery time, quality, and cost - we will explain all at once here.
  • Medical & Laboratory Equipment Sheet Metal Fabrication: 304/316 Precision Metal Solutions

    Medical & Laboratory Equipment Sheet Metal Fabrication: 304/316 Precision Metal Solutions

    BLUF (Bottom Line Up Front) — Medical Hardware Fabrication:
    Weizhi Hardware delivers high-precision sheet metal enclosures, internal optical chassis, surgical instrument trays, a

  • Custom Metal Enclosures & Mounting Brackets for Solar & BESS Energy Storage Systems

    Custom Metal Enclosures & Mounting Brackets for Solar & BESS Energy Storage Systems

    BLUF (Bottom Line Up Front) — Energy Storage Hardware Solutions:
    Weizhi Hardware manufactures heavy-duty IP54/IP65/IP66 outdoor battery storage enclosures (BESS), modular lithium

  • Sheet Metal & Stamping DFM Guide: Design Rules, Bend Radii, Hole Spacing & Tolerances

    Sheet Metal & Stamping DFM Guide: Design Rules, Bend Radii, Hole Spacing & Tolerances

    BLUF (Bottom Line Up Front) — Engineering Design Summary:
    Optimal sheet metal DFM requires adhering to fundamental geometric limits: maintain minimum inside bend radius R ≥ 1.

  • What If a Bulk Metal Order Arrives Defective? RMA & Quality Compensation

    What If a Bulk Metal Order Arrives Defective? RMA & Quality Compensation

    Quality Guarantee & RMA Protocol (BLUF):
    Defect Compensation Commitment: If custom metal stampings or sheet metal parts arrive out-of-tolerance, structurally flawed, or oxidi

  • How to Verify a China Metal Stamping Supplier: On-Site Audit & Red Flags

    How to Verify a China Metal Stamping Supplier: On-Site Audit & Red Flags

    How to Verify a Factory (BLUF):
    Verification Checklist: To distinguish a genuine Chinese metal stamping manufacturer from a middleman/trading agency, demand 3 hard proofs before

  • Sourcing Metal Parts from China: European Buyer's Guide

    Sourcing Metal Parts from China: European Buyer’s Guide

    BLUF — EU sourcing logistics: Plan 28–35 days by ocean freight or 5–7 days by air from China to Europe. Confirm the correct HS code before shipment: classification drives the app

  • CE marking for metal parts sold into the EU

    CE marking for metal parts sold into the EU

    BLUF — CE marking for custom metal parts: Standalone custom structural hardware usually does not need a CE mark. Request EN 10204 3.1 material certification, and verify RoHS 2.0

  • DDP vs DAP for EU imports: who is the importer of record

    DDP vs DAP for EU imports: who is the importer of record

    BLUF — DDP vs DAP importer of record (EU): Under DDP, the seller or its freight forwarder handles import clearance and pays duty and import VAT. Under DAP, the buyer is the impor

  • EU import compliance for metal parts: what the importer of record files

    EU import compliance for metal parts: what the importer of record files

    EU import compliance for metal parts looks like a paperwork problem, and it is really a responsibility problem. The customs declaration, the duty and the import VAT all belong to

  • China supplier vs local supplier: the factors that decide it

    China supplier vs local supplier: the factors that decide it

    The china supplier vs local supplier decision is usually made on gut feel, and then defended on price. However, that is the wrong order. The factors that actually change the outc

  • MIG vs TIG welding for stainless steel

    MIG vs TIG welding for stainless steel

    The MIG vs TIG welding choice for stainless steel comes down to one question. Does the weld have to look clean and stay corrosion resistant, or does the joint mainly have to be s

  • Sand casting vs die casting: which suits your part

    Sand casting vs die casting: which suits your part

    First, two things decide the route before cost is ever discussed: how many parts you will need, year after year, and how tight the tolerance grade has to be as cast. Sand casting

  • Sheet metal vs casting for an enclosure: the deciding factors

    Sheet metal vs casting for an enclosure: the deciding factors

    BLUF — enclosure choice: For runs below 5,000 pieces, sheet metal usually wins because tooling is minimal or zero. Above 10,000 pieces, aluminium die casting often wins on repeat

  • Legal Entities and Certifications

    Legal Entities and Certifications

    BLUF — legal entities and certifications: Manufacturing is supported by the 9,000 m² shared production base in Nanpi, with Hebei Weizhi and Changzhou Xinjiu Xinji identified as t

  • Custom Metal Brackets: Types, Specs and Sourcing

    Custom Metal Brackets: Types, Specs and Sourcing

    Custom metal brackets are the smallest part on the drawing and the one that holds the most. A bracket carries a load, aligns a component and survives the handling in between. Get

  • Stainless Steel Fabrication: Grades, Processes and Checks

    Stainless Steel Fabrication: Grades, Processes and Checks

    Stainless steel fabrication starts with a grade decision, not a machine decision. The grade sets the environment, the weld behavior and the price. Get it right and the part lasts

  • China Sheet Metal Supplier: How to Order Step by Step

    China Sheet Metal Supplier: How to Order Step by Step

    Choosing a china sheet metal supplier is a process decision, not a price decision. The right supplier shows up in the drawings, the samples and the documents. Hebei Weizhi is our

  • Sheet Metal Enclosure: Design, Materials and Fabrication

    Sheet Metal Enclosure: Design, Materials and Fabrication

    A sheet metal enclosure is a protective housing built from cut, bent and welded metal. It shields electronics, machinery and cabling from the environment. Our full-process factor

  • Metal Part Drawing: What to Include Before You Send It

    Metal Part Drawing: What to Include Before You Send It

    BLUF — 5 drawing essentials for an 8-hour quote: Send a 3D STEP model, a dimensioned 2D PDF with critical tolerances, a material/grade table, surface-finish requirements, and qua

  • OEM vs ODM: Which Fit Your Custom Metal Parts

    OEM vs ODM: Which Fit Your Custom Metal Parts

    OEM vs ODM decides who owns the design behind your parts. Hebei Weizhi is our brand, established in 2023. It is backed by our Nanpi factory, producing since 1999. We run both mo

123NEXTLAST

Service

  • Sheet Metal Fabrication
  • CNC Machining
  • Metal Casting
  • Surface Treatment
  • Design Optimization

Project case

  • Hardware Tools
  • Metal Box Body Shell
  • Metal Bracket
  • Metal Clips
  • Metal Frames
  • Metal Trays
CONTACT US FORM
Please enable JavaScript in your browser to complete this form.
Click or drag files to this area to upload. You can upload up to 10 files.
Describe your request
Loading
Hi, I’m R from Weizhi — need help? Chat with us
  • +86 13110075546
  • Send Email
  • WhatsApp
  • Back to top

Weizhi Hardware logo

Our goal is to provide each customer with a wide range of functions, competitive prices, excellent quality, and outstanding service.

Our services

  • Sheet Metal Fabrication
  • CNC Machining
  • Metal Casting
  • Surface Treatment
  • Design Optimization

Contact Us

Nanpi County, Cangzhou City, Hebei Province, China

+86-13110075546

: claire@hbweizhi.cn

ISO 9001:2015 QMS Active

Certified quality management system for custom metal stamping & precision sheet fabrication.

No. ZTZL28025Q1049R0S View Original →
🛡️ ISO 9001
RoHS Compliance Passed

Material testing for EU 2015/863 hazardous substances (STAR TECH Lab ST20260130007-5).

EU RoHS 2.0 Directives View Original →
🧪 RoHS
Intertek Factory Audit Verified

Independent on-site inspection report covering 9,000m² factory & manufacturing capacity.

Report 492885088_P+T View Original →
🏢 Audit
All Certificates 4 Documents

Explore full scan originals of business license, ISO 9001, RoHS, and factory audit reports.

Official Scans Open Page →
📜 Certs